南海成因及其演化模式探讨          下载免费PDF全文

李学杰  王哲  姚永坚  高红芳  祝嵩  徐子英 《中国地质》2020,47(5):1310-1322

尽管南海已进行深入的调查与研究，提出多种成因模型，包括挤出模型、弧后扩张模型、古南海俯冲拖曳模型等，但因其所处构造位置特殊，周边构造环境经历了复杂的改造，所有成因模式均未能得到广泛的认可。本文从三大板块相互作用入手，结合南海实测数据，提出南海形成的弧后扩张—左旋剪切模型。认为南海是古南海往北俯冲的弧后盆地，菲律宾海板块往北漂移形成的大规模左旋走滑是南海扩张的触发因素。印度—欧亚碰撞产生中南半岛挤出主要影响西南海盆扩张方向，使得扩张轴从近东西向转为北东向。南海及邻区晚中生代以来的演化可以分为以下阶段：1）早白垩世开始澳大利亚板块往北漂移，新特提斯洋往北俯冲消亡，导致弧后扩张，形成古南海；2）晚白垩世末—始新世，古南海往北俯冲，导致弧后拉张形成陆缘裂谷；3）早渐新世，受菲律宾海板块西缘大型左旋走滑影响，在原有裂谷的基础上从东往西海底扩张，形成南海；4）渐新世末，受俯冲后撤的影响，扩张中心往南跃迁，同时受西缘断裂左旋活动的影响，扩张轴从近东西西逐步转为北东向；5）早中新世晚期，南沙地块—北巴拉望地块与卡加延脊碰撞，南海扩张停止。  相似文献   

福建北部近岸东台山岛火山岩形成时代、地球化学与古太平洋板块俯冲的响应          下载免费PDF全文

王飞飞  张勇  韩宗珠  宋维宇  吴浩  宁泽 《中国地质》2020,47(5):1426-1437

福建北部沿岸岛屿岩石组合以晚中生代火成岩为主，研究认为是古太平洋俯冲消减的产物，对反演洋盆构造演化具有重要的指示意义。本次对其中的福建北部海域东台山岛上广泛发育的酸性火山岩进行了锆石U-Pb定年以及全岩主微量地球化学分析工作。2件年代学样品分别获得了92 Ma和86 Ma的锆石U-Pb年龄，确定东台山岛火山岩形成于晚白垩世。全岩地球化学特征指示火山岩样品以酸性钙碱性岩石为主，整体富集Rb、Ba等元素，亏损Nb、Ta、Sr、Eu等元素，显示弧型岩浆岩的地球化学组成。研究认为东台山岛火山岩起源于古老下地壳变沉积岩熔融，并在浅层岩浆房内经历了不同程度的结晶分异过程。结合区域上晚中生代岩浆作用由陆向海的时空迁移特征，福建北部沿岸岛屿火山岩形成的深部动力学机制应该与古太平洋俯冲过程中的板片回转过程相关。  相似文献   

沁水盆地南部长治区块煤层气田的地应力特征     

戴朝霞  孙蓓蕾  曾凡桂 《现代地质》2020,34(2):266-272

煤层气的生成、运移及富集等都与地应力的特征有直接的关系,掌握煤储层的应力特征对煤层气田的勘探和开发具有重要意义。基于沁水盆地南部长治区块煤层气开发区18口煤层气井的测井数据,利用带有残余构造应力的Anderson模型,分析垂向应力、最小及最大水平地应力的分布规律。结果表明:垂向应力基本上呈东西走向对称分布,东西部的应力大,中部应力小,数值在15.2~16.5 MPa之间;最小水平主应力自西向东呈现高→低→高→低的分布特点,数值在10.2~19.3 MPa之间;最大水平主应力也是自西向东呈现高→低→高→低的分布,数值在13.0~34.2 MPa之间。研究区东部所受埋深影响大于所受构造影响,而西部受到的构造影响大于其所受的埋深影响。研究区地应力分布规律与煤层气井的产气量存在高度相关性,研究成果可以为煤层气的勘探、开发和安全生产等方面提供参考。  相似文献   

大凌河河口地区中更新世晚期以来沉积环境演化     

商志文  李建芬  姜兴钰  李琰  王宏 《地质学报》2020,94(8):2433-2445

大凌河河口地区LZK06孔40m以浅岩心的沉积学、古生物学和年代学等综合研究以及该地区LZK02- 04钻孔资料，揭示了研究区中更新世晚期以来经历了两次海侵- 海退旋回，依次形成了中更新世晚期湖相/河流相 SymbolnB@ 晚更新世海相- 湖相/河流相 SymbolnB@ 全新世海相- 河流相地层。全新世早中期由于物源供给很少，研究区处于长达约10ka的饥饿滞留相沉积环境，平均沉积速率仅约0. 02~0. 05cm/a。全新世晚期约1500a cal BP以来，由于人类活动导致水土流失，河流输砂量增加，研究区开始了快速加积过程，平均沉积速率约0. 9~1. 2cm/a，下辽河平原被快速充填，开始成陆。与全球海面变化时空分布特征的对比，推断辽东湾的第II海相层发育于MIS 5- MIS 3早期，第I海相层发育于MIS 1阶段高海面时期。晚更新世以来频繁的海面升降是辽东湾泥质海岸带地层和环境演化的主要控制因素。  相似文献   

祁连山冻土区天然气水合物地球化学迁移机理探讨     

张富贵  秦爱华  祝有海  孙忠军  张舜尧  王惠艳  杨志斌  周亚龙 《矿床地质》2020,39(2):326-336

陆域冻土区天然气水合物成矿机制较为复杂,水合物横向难以对比,形成机理不清楚,急需对天然气水合物迁移机理进行研究。文章根据祁连山冻土区天然气水合物发现区钻井揭示的地质和地球化学资料以及岩芯样品分析测试结果进行了综合分析。结果显示,研究区中侏罗统和上三叠统均为较好烃源岩,天然水合物气源以热解气为主,主要由上三叠烃源岩迁移和中侏罗统木里组烃源岩扩散提供,显示了多源多期次的特点。根据地质和地球化学分析,祁连山天然气水合物的形成经历了晚侏罗世—早白垩世的气体运移与聚集、中新世中晚期—上新世整体抬升、第四纪游离气体转化成天然气水合物矿藏3个阶段,经历了"先聚集-再抬升-后成藏"等过程,是构造-气候耦合作用的结果,初步建立了祁连山冻土区天然气水合物迁移机理。  相似文献   

Sequence stratigraphic framework and sedimentary model of Shanxi Formation in northeast Zhoukou Depression of the North China Plate     

《China Geology》2020,3(4):575-590

The sequence stratigraphic framework of Shanxi Formation in the northeast Zhoukou Depression was established based on detailed sequence stratigraphical and sedimentological analysis by utilizing the logging and core data of six wells drilled in the eastern tectonic unit of Zhoukou Depression. It was divided into three third-order sequences, namely SQs1, SQs2, and SQs3 from bottom to top. Each sequence can be divided into a transgressive system tract (TST) and a highstand system tract (HST). Furthermore, four sequence boundaries and three maximum flooding surfaces were identified, and they are the bottom interface SBs and maximum flooding surface mfss1 of SQs1, the bottom interface SBs1 and maximum flooding surface mfss2 of SQs2, the bottom interface SBs3 and maximum flooding surface mfss3 of SQs3, and the top interface SBx from bottom to top. Carbonate tidal flat –clastic tidal flat sedimentary system developed in Shanxi Formation in the northeast Zhoukou Depression (also referred to as the study area) under the control of regression. Meanwhile, four sedimentary microfacies were identified in the sedimentary system, which are lime-mud flats, sand flats, mixed flats, and mud flats. The transgression in the study area occurred from the southeast to the northwest. Therefore, the northwestern part is the seaward side, and the southeastern part is the landward side. As revealed by relevant drilling data, SQs1 of the Shanxi Formation is characterized by the development of limestone and carbonaceous mudstone, with limestone, dark mudstone, and carbonaceous mudstone mainly developing. Meanwhile, lime-mud flats were mainly deposited in it. During the periods of SQs2 and SQs3, the sedimentary environment of the study area changed from the carbonate tidal flats to clastic tidal flats as the coastline migrated towards the sea. In these periods, sand flats mainly developed near the maximum flooding surfaces and were relatively continuous in the eastern and southern parts of the transgressive system tract; mixed flats were relatively continuous in the western and northern parts of the transgressive system tract as well as the eastern and southern parts of the highstand system tract; mud flats widely developed in the highstand system tract. Peat flats mainly developed in the period of HSTs2, with coal seams relatively developing in the southeastern part of the study area as revealed by drilling data. The peat flats in SQs2 are favorable hydrocarbon source layers, the lime-mud flats in SQs1 and sand flats formed in the transgression periods of SQs2 and SQs3 constitute favorable hydrocarbon reservoirs, and the mud flats form in the transgressions periods serve as favorable cap rocks. Therefore, the study area features a reservoir-cap assemblage for self-generating and self-storing of hydrocarbon, and the southeastern part of the study area can be taken as a favorable exploration area.  相似文献   

Identification of modal parameters of a 600-m-high skyscraper from field vibration tests     

Junwei Zhang  Qiusheng Li 《地震工程与结构动力学》2019,48(15):1678-1698

Accurate prediction of the dynamic responses of a high-rise building subjected to dynamic loads such as earthquake and wind excitations requires the information of its structural dynamic properties such as modal parameters including natural frequencies and damping ratios. This paper presents the identification results of the modal parameters based on field vibration tests on a 600-m high skyscraper. A set of tests, including ambient vibration test (AVT) and free vibration test (FVT), were conducted on the skyscraper to identify its modal parameters. Firstly, this paper presents and discusses the modal parameters of the skyscraper assessed by several identification methods applied to the AVT measurements. These methods include the wavelet transform (WT) method, the stochastic subspace identification (SSI) method, and the random decrement technique (RDT). Secondly, an active mass damper (AMD) system with total mass 1000 tons equipped into the skyscraper was used to excite the building for estimation of the modal parameters by FVT. Thirdly, this paper presents observations on the structural dynamic behavior of the skyscraper with the operation of the AMD system during a typhoon event. The field measurement results show that the AMD system functioned efficiently for suppression of the wind-induced vibrations of the skyscraper during the typhoon. This paper aims to further understand the structural dynamic properties of super-tall buildings and provide useful information for structural design and vibration control of future skyscrapers.  相似文献   

Late Quaternary paleo sea level geomorphological markers of opposite vertical movements at Salina volcanic island (Aeolian Arc)     

F. Lucchi  A. Ricchi  C. Romagnoli  D. Casalbore  R. Quartau 《地球表面变化过程与地形》2019,44(12):2377-2395

Raised marine terraces and submerged insular shelves are used through an integrated approach as markers of relative sea level changes along the flanks of the Salina volcanic island (Aeolian Arc, southern Italy) for the purpose of evaluating its crustal vertical deformation pattern through time. Paleo sea level positions are estimated for the terrace inner margins exposed subaerially at different elevations and the erosive shelf edges recognized offshore at different depths. Compared with the eustatic sea levels at the main highstands (for the terraces) and lowstands (for the shelf edges) derived from the literature, these paleo sea level markers allowed us to reconstruct the interplay among different processes shaping the flanks of the island and, in particular, to quantify the pattern, magnitudes and rates of vertical movements affecting the different sectors of Salina since the time of their formation. A uniform uplift process at rates of 0.35 m ka⁻¹ during the Last Interglacial is estimated for Salina (extended to most of the Aeolian Arc) as evidence of a regional (tectonic) vertical deformation affecting the sub-volcanic basement in a subduction-related geodynamic context. Before that, a dominant subsidence at rates of 0.39–0.56 m ka⁻¹ is instead suggested for the time interval between 465 ka (MIS 12) and the onset of the Last Interglacial (MIS 5.5, 124 ka). By matching the insular shelf edges with the main lowstands of the sea level curve, a relative age attribution is provided for the (mostly) submerged volcanic centres on which the deepest (and oldest) insular shelves were carved, with insights on the chronological development of the older stages of Salina and the early emergence of the island. The shift from subsidence to uplift at the Last Interglacial suggests a major geodynamic change and variation of the stress regime acting on the Aeolian sub-volcanic basement. © 2019 John Wiley & Sons, Ltd.  相似文献   

可见光下Li+/CNTS-TiO2光催化剂降解海洋柴油污染的研究          下载免费PDF全文

于晓彩  王力萍  刘京华  郭美岑  朱婉婷  廖佳琪  吴云英 《海洋学研究》2019,37(1):52-58

通过溶胶-凝胶法,以CNTS-TiO₂为前驱物制备了Li⁺掺杂CNTS-TiO₂的纳米复合光催化剂(以下均称为Li⁺/CNTS-TiO₂),采用X射线衍射(XRD)、扫描电镜(SEM)等测试手段对光催化剂进行表征,结果表明制得的催化剂为纳米材料且在TiO₂的基础上增大了比表面积。利用掺杂量为3%的Li⁺掺杂CNTS-TiO₂复合光催化剂(以下均称为3%Li⁺/CNTS-TiO₂)光催化降解海洋柴油污染,在可见光条件下考察了Li⁺掺杂量、煅烧温度、光催化剂投加量、柴油初始质量浓度、光催化反应时间、H₂O₂质量浓度等条件对光催化实验的影响。进行正交实验,确定最优化工艺条件为:Li⁺掺杂量为3%,光催化剂的煅烧温度为600 ℃,3%Li⁺/CNTS-TiO₂的投加量为0.1 g/L,降解柴油初始质量浓度为0.4 g/L,光催化反应时间为3 h,H₂O₂质量浓度为0.6 g/L,降解率可以达到95%以上。同时对此光催化剂进行应用试验,试验结果表明光催化剂去除效果优异,去除率可达91.87%。  相似文献   

深海滑坡灾害的物质点法模拟     

董友扣  马家杰  王栋  RANDOLPH Mark 《海洋工程》2019,37(5):141-147

深海滑坡可以沿着斜坡搬运大量沉积物,是危害巨大的海洋地质灾害之一。评估深海滑坡的流滑机制并量化分析其对海底结构物的冲击对海洋资源的开发利用至关重要。采用物质点法对滑坡的滑动特性进行了总应力分析。设计了三组不同的土体、海床参数,展现了三种不同的滑动形态:延展、块体和扩张。随后复现了流滑体对部分暴露管线的冲击过程,并对冲击力的稳定值进行了分析,分析中考虑了流滑体的惯性、抗剪强度和静压力的影响。研究表明,物质点法能够用于模拟深海滑坡的流滑过程及其对海底结构物的冲击,可以为海洋工程中的实际设计工作提供服务。  相似文献